Over a BILLION gallons of fuel treated yearly
Lab Tests
In an effort to illustrate the effects of Xp³ products, below you will find some Lab Test results based on tests conducted by independent third party laboratories.
* We are constantly adding more and more Lab Tests so please continue to check back.
| PRODUCT | TEST | DESCRIPTION | |
| DIESEL – Xp3D | |||
| Lubricity 1 | HFRR (High-Frequency Reciprocating Rig) was done accordingly with ASTM D-6079 |  |
|
| Lubricity 2 | Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE), ASTM D-5001 | |
|
| Torque and Horsepower | Tests were carried out on a dynamometer | |
|
| Emissions – Particles 1 | Xp3D effect on regulated emissions and particulate size, when run on a London Double Decker Bus | |
|
| Emissions – Particles 2 | Assess the efficiency of the combustion, quantify emissions, and compare results against the values established by the standard NOM-085-ECOL-1994 | |
|
| Oil Analysis 1 | Effect on engine oil when using Xp3D in the diesel fuel | |
|
| Oil Analysis 2 | Effect on engine oil when using Xp3D in the diesel fuel | |
|
| Biocide | Evaluation of Xp3D as a biocide and its effectiveness in treating contaminated Diesel | |
|
| CETANE IMPROVER – Xp3D-C | |||
| Torque | Dynamometer test to determine the increase in torque | |
|
| Cetane Number | Cetane number increase – ASTM D 6890 method | |
|
| ANTICORROSIVE COATING – Xp3RB5100 | |||
| Corrosion | Resistance to Salt Spray Test (ASTM B-117) Xenon Arc Test (ASTM G-155) Saltwater Immersion Test (ASTM D-870) Taber Abrasion Test (ASTM D-4060) |
|
|